Cách quản lý vốn casino-Cách đánh bạc trong casino
The remote control function permits the unit's transmission to be controlled from external equipment.
Input sensitivity can be switched between MIC and LINE signal levels depending on the type of equipment to be connected to the input.
A maximum of 5 different channels can be simultaneously used in the same location.
Compact size and high reliability.
Power Requirement 230 V AC, 50 Hz
Power Consumption 3 W
Modulation Frequency modulation
Transmitting Frequencies 470 MHz band (5 ch) (470.075, 470.150, 470.375, 470.625, 470.725 MHz)
RF Carrier Power 5 mW
Oscillator PLL synthesizer
Frequency Response 150 - 6,000 Hz (Desk-top transmitter to Portable receiver)
Pre-emphasis 50 ?s
Input Level(selectable) Standard input: -54 dB*/-60 dB*/-66 dB* (Mic)-12 dB*/-18 dB*/-24 dB* (Line) Maximum input: -30 dB*/-36 dB*/-42 dB* (Mic)+12 dB*/+6 dB*/0 dB* (Line) Mic/Line selection, 600 Ω, unbalanced, phone jack
Remote Input Make contact input: Release voltage: 2 V DC short-circuit current: 0.2 mA loop resistance: under 100 Ω Remote control mode: Transmit radio signal when at make
Operation Temperature -10ºC to +40ºC
Finish ABS resin, dark gray
Dimensions 140 (W) × 31 (H) × 119.5 (D) mm
Weight 270 g
Accessory AC-DC adapter (1.8 m) ... 1, Screw driver ... 1, 3-pole phone plug cord (2 m) ... 1